School Lab Furniture-Create a Beautiful Environment for Canada Client in 2017      School Lab Furniture that are resistant to corrosion and acid and alkali are usually made of special materials and designed to meet the needs of high-intensity chemical experiments in laboratories. The following are common material selection and design points:        1.School Lab Furniture Countertop material Epoxy Resin board Advantages: Resistant to strong acids, strong alkalis, organic solvents, high temperatures (generally above 120°C), and strong impact resistance. Applicable scenarios: Highly corrosive chemical experiments (such as concentrated sulfuric acid, nitric acid, hydrofluoric acid, etc.). Ceramic Advantages: Resistant to acids and alkalis, high temperatures (up to over 1000°C), and easy to clean. Disadvantages: High brittleness and poor impact resistance. Stainless steel (316L stainless steel is better) Advantages: Corrosion-resistant, wear-resistant, easy to clean, suitable for general acidic and alkaline environments. Disadvantages: Not resistant to hydrofluoric acid, high-concentration chlorides, etc. Polypropylene (PP) or polytetrafluoroethylene (PTFE) countertop Advantages: Resistant to acids, alkalis and organic solvents, suitable for special corrosive experiments. Disadvantage: Poor heat resistance (about 80°C for PP and about 260°C for PTFE).                 2.School Lab Furniture Cabinet body and frame Anti-corrosion coated steel frame: The surface is sprayed with epoxy resin or polyester powder to enhance corrosion resistance. PP (polypropylene) or PVC cabinet body: All-plastic structure, suitable for highly corrosive environments. Stainless steel frame: 316L stainless steel is more corrosion-resistant, but it is more expensive. 3. Other design points ✅ leak-proof design: Add a water-blocking edge to the edge of the countertop to prevent liquid from overflowing. ✅ High-temperature resistant structure: Some experiments require the tabletop to be able to withstand high temperatures (such as electric furnaces, muffle furnaces). ✅ Scratch-resistant and wear-resistant: The surface should be scratch-resistant to prevent accelerated corrosion after long-term use.            

                Custom University Steel Wood Chemistry Lab Workench For Mr. Amer in Sudan in 2023   The steel-wood laboratory bench is a type of laboratory furniture that combines a steel frame with a wooden countertop/cabinet. It takes into account stability, durability and aesthetics, and is suitable for general chemistry, biology, physics and other laboratories. The following is a detailed introduction to the steel and wood laboratory bench 1. Steel Wood Chemistry Lab Workbench Structural features Steel frame section Cold-rolled steel plates or square steel pipes are usually adopted, and their surfaces are treated with epoxy resin spraying or electrostatic spraying to enhance rust prevention and corrosion resistance. The steel frame structure is stable and has a strong load-bearing capacity, making it suitable for placing heavier instruments such as centrifuges and ovens. Wooden part Countertop: Solid physical and chemical board, veneered physical and chemical board, fireproof board, etc. are available as options. Cabinet body: Generally, melamine board (moisture-proof board) or multi-layer solid wood board is used. The surface is corrosion-resistant and easy to clean. 2. Steel Wood Chemistry Lab Workbench  Main advantages     A. Strong stability: Supported by a steel frame, it is more stable than a fully wooden structure, resistant to earthquake and deformation.      B.economical and practical: Compared with all-steel or epoxy resin benches, it has a lower cost and is suitable for laboratories with limited budgets. Elegant and stylish: The wood grain finish can be matched with different laboratory styles, creating a softer visual effect.      C.Modular design: can be flexibly combined, facilitating later expansion or layout adjustment. 3. Applicable scenarios Teaching Laboratory (Middle School and University Basic Chemistry/Biology Experiments) General chemistry experiments (in non-strong acid and strong alkali environments) Physics and Electronics Laboratory (no strongly corrosive reagents) Pharmaceutical testing, medical laboratories (mild reagent handling)   3. Steel Wood Chemistry Lab Workbench  Dimentions: Product Dimensions (Length*Depth*Height) Floor Mounted Wall Bench L*750*850mm/Customize (Lx2.46'x2.78'/Customize) Floor Mounted Island Bench L*1500*850mm/Customize (Lx4.92'x2.78'/Customize) Floor Mounted Corner Bench 1000*1000*850mm/Customize (Lx3.28'x3.28'/Customize)            

  Full steel chemistry lab bench is a durable and sturdy work surface commonly used in laboratories, industrial settings, or workshops. These benches are typically made entirely of steel (often stainless steel) to ensure strength, chemical resistance, and ease of cleaning. Key Features of a Full Steel Chemistry Lab Bench Supply : Material: Made of high-quality steel (often stainless steel, such as 304 or 316 grade for corrosion resistance). Some may have powder-coated or epoxy finishes for added durability. Design & Structure: Heavy-duty steel frame for stability. May include reinforced legs or cross-bracing for extra support. Some models have adjustable height mechanisms. Chemistry Lab Bench Supply Work Surface: Steel top for chemical and heat resistance. May include backsplashes, sinks, or cutouts for utilities (electrical outlets, gas lines, etc.). Applications: Chemistry labs (acid-resistant steel surfaces). Industrial workstations (for heavy equipment). Cleanrooms or sterile environments (easy to sanitize). Mechanical workshops (high load-bearing capacity). Customization Options: Shelving, drawers, or cabinets underneath for storage. Modular designs for flexible lab setups. Integration with fume hoods or other lab equipment. Where to Buy? You can find full steel lab benches from: Lab furniture suppliers (e.g., https://www.chemistry-labfurniture.com/). Would you like recommendations based on specific needs (size, weight capacity, chemical resistance, etc.)? Let me know!   Photos:      

                            Ductless Fume Hood Suppliers For Mr..Arnold Data In Thailand     1. Hood body&base cabinet: Use galvanized steel sheets ≥1.2mm, electrostatically sprayed with epoxy resin, and covered with durable anti-chemical lead-free coating to maintain high finish and minimize the impact of corrosion and moisture. *2. Front sash and side sash: Use ≥6mm acrylic sheets, which has excellent weather resistance, excellent chemical resistance, not easy to age, colorless and transparent, transparent throughout, visual comfort, and beautiful appearance. *3. Seven-inch LCD touch screen display, high-definition display resolution 1024*600, perfect visual system. *4. Real-time temperature and humidity environment monitoring system, display temperature and humidity, set alarm parameters, and ensure the safety of product use. *5.Ductless Fume Hood Suppliers Fan monitoring: fan system failure alarm, online adjustable fan speed, to ensure the required air volume for different chemical operations. *6. Filter saturation alarm system: The product is equipped with double-layer filters and dual VOC probes. One probe monitors the indoor air quality, and one probe monitors the filter saturation status. The filter sets the saturation alarm value. If the concentration exceeds the set value for a long time, the filter needs to be replaced. *7. PSC fan imported from the United States, 24 volts, stable performance, ultra-quiet, no spark static. *8. The high-efficiency filtration system, according to the particle size, selects the arrangement and distribution, follows the ASTM standard, effectively targets acidic gases and organic gases, and has strong adsorption capacity. The high-efficiency HEPA filter is used for particles, and the filtration efficiency is 99.995% for particles larger than 0.3um. *9. The power of LED lighting lamp is equivalent to 25W fluorescent lamp, which does not generate heat, safety does not affect the temperature of the experimental environment, energy saving, environmental protection and long life. *10. Ductless Fume Hood Suppliers Epoxy resin work surface have excellent chemical stability, super corrosion resistance, good impact resistance without damage, excellent high temperature resistance, integrated core penetration, long service life, no delamination, no expansion, no cracking . *11. With the function of process monitoring, customers can view the operating status of the equipment in real time through the mobile client, and can remotely set operating parameters. When the device alarms, the alarm information can be pushed through the client.   Detail Information Place of Origin: CHINA Certification: CE, ISO9001:2005 ,3C Airflow Velocity: 0.3-0.6m/s Air Exhaust: Top Exhaust Warranty: 1 Year Worktop: Phenolic Etc. Sash Opening: Vertical Sliding Noise Level: ≤60dB Blower: Pp Anti Corrosion Filter Efficiency: ≥99.99% Model No: CG-1800C Origin: Chengdu, China Face Velocity: 0.4-0.6 M/S External Dimension: 800*620*1245mm Certificated: CE Air Rod: 2 Level Mail Packing: Yes Foot: 320 Nylon Foot Installation: Easy Lighting: LED Trademark: Ample Sash: Tempered Glass Controls: Digital Seat Material: PU Leather+ Sponge Packaging Details: Export Playwood Packgee Supply Ability: 10000 pcs/ month      

Custom Automatic lifting & Dropping Door Fume Hood For American   Customer Khoa on August 31         SUCLAB fully automatic lifting door fume hood is an electric lifting door without counterweight, including a servo motor, coupling, roller, fabric belt, glass lifting connection sheet metal, glass slide groove, and glass window. The servo motor is connected to the roller through a coupling. A cloth tape is wound around the roller, and the cloth tape is connected to the glass window through a glass pull and sheet metal. The glass window is clamped in the glass slide groove. The utility model adopts the method of connecting a roller with a cloth belt, converting the rotational motion of a servo motor into the up and down linear motion of a glass window. The structure is simple and clear, the control is simple, and it is not easy to have problems. It replaces human labor with electricity, reduces the burden on human labor, and eliminates the counterweight. There is no need to consider a fixed counterweight during transportation. By using fabric straps to connect the roller and the glass window, the impact of force during movement is reduced, and there will be no sudden change in force, making it safer and more reliableThe present invention aims to provide a height control system device for the fully automatic lifting dropping door fume hood , in order to solve the problem proposed in the background technology that when the fume hood is working, the transparent automatic door needs to be completely lowered to the extent of sealing the window, so this will more or less cause external water stains and dust to adhere to the outer wall of the sealed transparent automatic door. To keep the fume hood in the best condition for the next use, it is necessary to specially wipe and clean the transparent automatic door to maintain its cleanliness during use. This requires dedicated cleaning personnel to regularly clean the transparent automatic door. To achieve the above-mentioned objectives, the present invention provides the following technical solutions: A device for an automatic door height control system of a fume hood, including a storage cabinet body and a fume hood body, the fume hood body is installed at the upper end of the storage cabinet body, the upper end of the fume hood body is provided with a chassis, a ventilation pipe is provided at the center of the upper end of the chassis, a window is provided inside the front end of the lower half of the fume hood body, and a control switch is provided on the outer wall of the front end at the lowest side of the fume hood body. Vertical lifting sliding grooves are provided on the inner walls at both ends of the  fully automatic lifting dropping door fume hood body behind the window. Between the two lifting sliding grooves, there is a transparent automatic door, which is set at the rear of the window. The transparent automatic door includes transparent tempered glass and an aluminum alloy frame, and the transparent tempered glass is embedded inside the aluminum alloy frame. The left and right ends of the said aluminum alloy frame are respectively connected to the interior of two lifting slide grooves. The upper side of the window is horizontally internally connected with an auxiliary cleaning device. The auxiliary cleaning device includes an adjusting fixed head, an installation cross plate, an adjusting screw, an adjusting screw hole, a connecting strip plate, a cleaning cotton, a compression spring and an anti-slip pad. The installation cross plate is horizontally arranged inside the upper side of the window. Both ends of the said installation crossplate are internally provided with outward-opening adjusting screw holes. The circum-circumference of each of the two adjusting screw holes is internally provided with outward-penetrating adjusting screws. The outermost ends of each of the two adjusting screws are provided with adjusting fixed heads. Anti-slip pads are provided on the outer walls of each of the two adjusting fixed heads. Both of the two said adjusting and fixing heads are respectively connected to the inner walls at the left and right ends of the top side of the window through anti-slip pads. A connecting strip plate is provided on the parallel rear side of the installation cross plate. The installation cross plate is fixedly connected to the connecting strip plate through a compression spring. A cleaning cotton is connected to the outer wall at the other end of the connecting strip plate. The cleaning cotton and the connecting strip plate are fixedly connected through an adhesive. Preferably, the aluminum alloy frame connected to the right end of the transparent tempered glass is vertically internally provided with lifting screw holes. The lower end of the lifting slide groove on the inner wall of the right end of the fume hood body is provided with a bottom fixed hole with an upward opening. The cabinet of is internally provided with a lifting motor near the right front corner, and the lifting motor is connected with a vertical lifting screw. The lowest end of the lifting screw runs through the inner wall of the bottom of the chassis and the lifting screw hole in sequence and is embedded in the inner circle of the bottom fixed hole. The lifting motor is electrically connected to an external power supply. Preferably, a ventilation opening is also provided inside the center of the bottom of the chassis, and a fan is provided inside the chassis above the ventilation opening. The ventilation pipe is set directly above the fan, and the ventilation pipe is connected to the interior of the fume hood through the ventilation opening. Preferably, after the transparent tempered glass is embedded into the interior of the aluminum alloy frame, it needs to be fixed and encapsulated with glass glue. The front and rear outer walls of the transparent tempered glass and the aluminum alloy frame are respectively kept flush. Preferably, the outer walls of the four sides of the aluminum alloy frame are all smooth outer walls. After the left and right ends of the aluminum alloy frame are respectively connected to the inner walls of the lifting sliding grooves near the front side of the fume hood body, the outer walls of the front ends of the left and right sides of the aluminum alloy frame are respectively attached to the inner walls of the front and rear ends of the two lifting sliding grooves. Preferably, the lateral length of the installation crossplate is less than that of the window. The installation crossplate is respectively flush with the outer walls around the connecting strip plate and the cleaning cotton. After the auxiliary cleaning device is installed laterally into the inner part of the top side of the window, the outer wall at the front end of the installation crossplate is flush with the outer wall at the front end of the fume hood body. Preferably, there are a total of eight evenly spaced compression springs connected between the installation crossplate and the connecting strip plate. The shapes, sizes and elastic coefficients of the eight compression springs are all the same. After the auxiliary cleaning device is laterally installed inside the uppermost side of the window, all eight compression springs are in a compressed state. The eight compression springs all tightly press and adhere the cleaning cotton connected to the connecting strip plate to the outer wall at the front end of the transparent tempered glass through elastic force. Preferably, the storage cabinet body, the fume hood body and the chassis are all fixedly connected by welding, and the outer walls around the storage cabinet body, the fume hood body and the chassis are all kept flush.  

SUCLAB chemical fume hood with water scrubber Exporters including : a cabinet body, a ventilation module and a spray module corresponding to the ventilation module. A cavity is provided inside the cabinet body. The ventilation module includes a first exhaust channel connected to the cavity. The spray module includes a first spray head for spraying the inner wall of the first exhaust channel. The first exhaust channel is provided with an exhaust port. The spray type chemcial fume hood with water scrubber exporters  of the present utility model is added with a spray module set in conjunction with the ventilation module. The water scrubber  module uses a spray head to spray the inner lining space of the first exhaust channel to prevent the formation of crystallization in the inner lining of the experimental gas when it flows through the first exhaust channel. At the same time, a discharge port for the gas and liquid flowing through the first exhaust channel is set to prevent the gas and liquid from flowing back into the cavity. It not only optimizes the experimental environment but also enhances the safety of the experiment .   Designing :        

Chemical Resistant Phenolic Resin School Ductless Fume Hood Suppliers for University of the Philippines Product Description: Our School Ductless Fume Hood Suppliers boasts an impressive Filtering Efficiency of over 99.9%, ensuring that harmful fumes and particulates are effectively captured and filtered before being released back into the environment. With a Filter Efficiency of equal to or greater than 99.99%, you can trust that our fume hood will provide a clean and safe working environment for you and your team. The Blower of our Ductless Fume Hood is made of Pp Anti Corrosion material, which enhances its durability and resistance to corrosive chemicals. This ensures a long lifespan for the blower, reducing maintenance costs and downtime. The Worktop is constructed from Phenolic Etc., a material known for its chemical resistance and durability. The Working Surface features Chemical Resistant Phenolic Resin, providing a safe and stable area for working with hazardous materials. As one of the premier ductless fume hood manufacturers in the industry, we understand the importance of quality, safety, and efficiency in laboratory equipment. Our Ductless Fume Hood is designed to meet the highest standards and provide a reliable solution for handling hazardous fumes and chemicals. Whether you are working in a research laboratory, educational institution, or industrial facility, our Ductless Fume Hood offers the performance and reliability you need to ensure a safe working environment. Trust in our expertise and experience as ductless fume hood manufacturers to provide you with a top-of-the-line product that meets your needs and exceeds your expectations. Invest in a Ductless Fume Hood from one of the leading ductless fume hood manufacturers in the industry and experience the difference in safety, efficiency, and quality. Contact us today to learn more about our Ductless Fume Hood and how it can benefit your laboratory or facility.   Features: Product Name: School Ductless Fume Hood Suppliers Filtering Efficiency: >99.9% Air Exhaust: Top Exhaust Sash Opening: Vertical Sliding Size: 1000mm*620mm*2050mm Control System: LCD Touch Screen   Technical Parameters: Sash Opening Vertical Sliding Airflow Velocity 0.3-0.6m/s Material Stainless Steel Filtering Efficiency >99.9% Control System LCD Touch Screen Worktop Phenolic Etc. Noise Level ≤60dB Size 1000mm*620mm*2050mm Filter Efficiency >=99.99% Blower Pp Anti Corrosion   Applications: SUCLAB School Ductless Fume Hood Suppliers HZJ 025 is a versatile and high-quality fume containment solution manufactured in China by leading ductless fume hood manufacturers. With dimensions of 1000mm*620mm*2050mm, this fume hood is designed to provide efficient containment of fumes and particles in various laboratory settings. The HZJ 025 model boasts a filtering efficiency of >99.9%, ensuring a clean and safe working environment for laboratory personnel. The ductless design eliminates the need for external ventilation systems, making it a convenient and cost-effective choice for labs with space constraints. Equipped with a filter efficiency of ≥99.99%, the SUCLAB Ductless Fume Hood HZJ 025 offers exceptional performance in capturing and removing harmful substances from the air. The included worktop, made of materials such as Phenolic, provides a durable and chemical-resistant surface for conducting experiments and handling hazardous materials. Whether in research facilities, educational institutions, or industrial laboratories, the SUCLAB Ductless Fume Hood HZJ 025 is an ideal solution for a wide range of applications. Its compact size and efficient design make it suitable for use in various scenarios where fume containment is essential for safety and compliance. Customers can have peace of mind with a 1-year warranty included with the SUCLAB Ductless Fume Hood HZJ 025, ensuring reliable performance and support from the ductless fume hood manufacturers. Trust SUCLAB for top-quality fume containment solutions that meet the highest standards of safety and efficiency. Customization: Explore our Product Customization Services for the School Ductless Fume Hood Suppliers : Brand Name: SUCLAB Model Number: HZJ 025 Place of Origin: CHINA Size: 1000mm*620mm*2050mm Airflow Velocity: 0.3-0.6m/s Power Supply: 220V/50Hz Control System: LCD Touch Screen Warranty: 1 Year   Support and Services: The Ductless Fume Hood product comes with a comprehensive Product Technical Support and Services package to ensure optimal performance and customer satisfaction. Our technical support team is available to assist with installation, setup, troubleshooting, and any product-related inquiries. Additionally, we offer maintenance services, calibration, and periodic performance checks to keep your fume hood operating efficiently.   Packing and Shipping: Product Packaging: The School Ductless Fume Hood Suppliers  are carefully packaged in a sturdy cardboard box to ensure safe transportation. Each component is securely wrapped in bubble wrap to prevent any damage during shipping. Shipping: We offer fast and reliable shipping for the Ductless Fume Hood. Orders are typically processed within 1-2 business days and shipped via a reputable courier service. You will receive a tracking number to monitor the delivery status of your package.  

304 stainless steel lab bench laboratory benches factories  are a common high-quality material for laboratory benches, widely used in laboratories, medical care, food processing and other fields. The following is its detailed material description: 1. Material properties 304 stainless steel of laboratory benches factories (06Cr19Ni10) is a type of austenitic stainless steel, featuring excellent corrosion resistance, high-temperature resistance and mechanical properties. Chemical composition (typical value) : Carbon (C) ≤0.08% Chromium (Cr) 18-20% → provides corrosion resistance Nickel (Ni) 8-10.5% → Enhances acid resistance and toughness Manganese (Mn) ≤2% Silicon (Si) ≤1% Phosphorus (P) ≤0.045% Sulfur (S) ≤0.03% 2. Advantages  A . Strong corrosion resistance: It has excellent resistance to most acids, alkalis, salts and organic solvents, making it suitable for chemical laboratory environments. B. High temperature resistance: Can withstand relatively high temperatures (below approximately 800°C), suitable for high-temperature experimental operations. C. Easy to clean and disinfect: The surface is smooth without pores, which is not prone to bacterial growth and meets hygiene standards such as GMP and FDA. D. High strength: impact-resistant, wear-resistant, long service life. E. environmentally friendly and non-toxic: no coating, no volatile substances, suitable for clean laboratories or biosafety laboratories. 3. Application scenarios Chemical laboratory: Resistant to acid and alkali corrosion, suitable for storing highly corrosive reagents. Biological laboratory: Easy to clean and disinfect, meeting aseptic requirements. Medical/Pharmaceutical: Complies with medical-grade hygiene standards. Food industry: Anti-pollution, suitable for direct contact with food. Electronic laboratory: Anti-static, anti-magnetic interference (some specially treated models). 4. Surface treatment method Brushed surface (common) : Scratch-resistant, beautiful and wear-resistant. Mirror polishing: High gloss, easy to clean, but prone to showing fingerprints. Sandblasting treatment: Matte texture, anti-glare. 5. Maintenance Precautions Avoid using strong acids (such as hydrochloric acid, hydrofluoric acid) or high-concentration chloride solutions, as they may cause pitting corrosion. When cleaning, you can wipe with neutral detergent or alcohol. Do not scratch with a steel wool ball. Regularly inspect the welding/splicing points to prevent structural loosening caused by long-term corrosion. 6. Compared with 316 stainless steel Characteristics 304 stainless steel 316 stainless steel (containing 2-3% molybdenum) Corrosion resistance Good Superior (resistant to seawater/chlorides Cost Lower Higher Applicable environment General laboratory High-salt/Marine environment If the experimental environment involves strong corrosive media (such as seawater, chloride ions), it is recommended to upgrade to 316 stainless steel of  stainless steel laboratory benches factories. If further technical parameters are required (such as thickness standards, load-bearing capacity, etc.), specific requirements can be provided for detailed explanation.    

Custom Steel Wood Lab Casework for Mr.Tar Client in People's Republic of   Mongolia in 2024   Feature   1. Countertop: Acid and alkali resistance,not easy to deform and fade. 2. Cabient: Beautiful and generous,bearing capacity and impact resistance. 3. Drawer: Three section silent rail,aluminum alloy handle,long sevice life. 4. Foot: 5mm adjustable foot,nylon or stainless steel material. 5. Type: Floor mounted,C-frame or H-frame Structure with cabient. 6. Colour: According to requirement of client,it can be customized.   Specification   Main Frame Generally adopts C-type high-quality square steel, the surface is pickled, phosphatized, uniform gray epoxy spraying, chemical anti-rust treatment, acid and alkali corrosion resistance, good load bearing performance and long service life. Each group of independent Steel Wood Lab Casework can be equipped with a circuit breaker safety protector so that each test bench can independently control the power supply.   Countertop Generally adopt epoxy resin board, phenolic resin board, etc. The surface is treated by technology, smooth and pore-free, acid and alkali resistant, anti-corrosion, milling edge treatment, table top corrosion resistance and waterproofing meet the high quality standards of the laboratory industry. .   Door Panel E1 grade high quality environmental protection type melamine board is generally used; all sections are treated with high quality PVC edge sealing and waterproofing, and the four sides are chamfered and smoothed.    Steel Wood Lab Casework Cabinet Body E1 grade double-sided gray high-quality environment-friendly melamine board is generally used; all visible surfaces are treated with high-quality PVC edge sealing and waterproofing. All the plates are disassembled and three-in-one connection, the structure is stable, the bearing performance is good and easy to be demolished, which is conducive to Used in this special working environment of the laboratory.   Drawer The drawer panel material is the same as the door panel. The bottom plate is generally made of E1 grade high quality MDF. The other materials are the same as the cabinet.           Active Backboard E1 grade 4mm thick double-sided gray high-quality MDF board is generally used. All sections are waterproofed by high-quality PVC edge sealing. The activity is detachable and easy to use.   Hinge Usually adopts self-closing stainless steel damping hinge. When the horizontal angle of the cabinet is less than 15 degrees, the door can be closed by itself. It has good elasticity, beautiful appearance, no noise during use and long service life.   Guide Rail It adopts three-section guide rail, and the surface is electrostatically sprayed (galvanized) with black epoxy resin. It is corrosion-resistant and convenient for the staff of hand-held items to facilitate the use in the special working environment of the laboratory.    Steel Wood Lab Casework Handle Handle stainless steel, aluminum alloy or anti-corrosion PVC material, mold molding, surface chemical treatment, beautiful appearance, user-friendly design.   Universal Adjustment Foot Special injection molding adjustable foot, load-bearing, moisture-proof, anti-skid, antibacterial, anti-corrosion, can adjust the height of the cabinet according to the indoor floor; the appearance is beautiful, the design is humanized.   Socket It adopts milky white 220V / 10A universal two or three plug sockets, and uses various domestic or imported instrument plugs to be safe and durable.